For those who use Android phones, the recovery mode is a quite essential thing that they should know. Whether you want to flash custom firmware or third-party modes, you would need this. Apart from that, this mode helps to perform some cleaning actions like factory reset and wipe cache factory reset. Therefore, if you’re not aware of this mode, you better read this guide thoroughly. In this tutorial, we’ll help you enter/boot recovery mode on Samsung Galaxy M20 through different methods.

The recovery mode has been quite popular since the Android operating system was launched in the market. Primarily, this mode has been built for troubleshooting purposes. It doesn’t depend upon the Android firmware to run. Therefore, no matter whether your phone is able to boot Android firmware or not, you must be able to boot into the recovery mode.

That allows users to perform some cleaning and troubleshooting actions on Android phones. This way one can troubleshoot most of the problems and bugs that we find Android users suffer from. There are different ways to enter recovery mode on Samsung Galaxy M20 smartphone. It depends on you and the situation. Either one can use the hardware keys, as the usual way, or access this mode through ADB commands.

Additionally, there’s one more way of getting into this mode. We can use Quick Reboot application for that purpose. However, that would require root access and that voids the warranty on your phone. Therefore, you can boot into this mode in different ways. For root users, things are pretty easier and some extraordinary privileges. So, if you’ve rooted your phone already, then just simply use third-party apps to switch different modes on your phone.

The recovery mode features some maintenance related options. That ensures that getting into this mode or using it won’t hurt your phone. You can anytime use this mode to factory reset, manually put updates, flash custom firmware and clear cache partition on your phone. These actions help to calibrate performance and stability on Samsung Galaxy M20 smartphone.

If you’re worried about low performance on your phone, then you must check our list of best solutions to fix low performance on Samsung Galaxy mobile phones. These solutions will help you leverage recovery mode for stable performance. During this tutorial, we’ll learn to discuss these three different methods to enter recovery mode on Samsung Galaxy M20; through hardware keys, ADB commands and using a dedicated application.

We would recommend you not to indulge with this mode unknowingly. The recovery mode has sufficient privileges that can wipe your phone instantly. And if that happens, there’s no way to revert that action. Therefore, having a general backup is always recommended. That’s much talk about this mode, now lets’ go ahead and learn to boot into this mode on Galaxy M20 mobile phone.

Enter Recovery Mode on Samsung Galaxy M20 using hardware keys

  1. Turn OFF your phone.
  2. Now, press and hold ‘Power’ and ‘Volume Up’ buttons for a few seconds.
  3. As the Samsung logo appears on the screen, release these buttons.
  4. Next, you should see a Warning screen, just press the Volume Up button to confirm.
  5. You should enter into the recovery mode.
Enter Recovery Mode on Samsung Galaxy M20

That’s that most common and easiest way to reach the recovery mode on Samsung Galaxy M20. You must press the buttons in the mentioned sequences or else your phone might turn ON as it does normally. This method is commonly used among Android phones. The pattern that we have mentioned above remains the same for most of Samsung’s smartphones that do not have a home button.

Once you get into the recovery mode, there are several actions necessary for Android users. ‘Wipe data/factory reset’ and Wipe cache partition are among them. We can perform these two actions to factory reset our phone. If you observe that your phone isn’t performing well, these actions should worth your attention. Before you do so, make sure to backup your phone or else you might end up losing your precious files.

This method works all the time until hardware keys are working fine. If can’t rely on the above method to access this mode, you can use the ADB commands, though it requires some preparations, it worth your time.

Boot Recovery Mode on Samsung Galaxy M20 through ADB commands

Basically, ADB stands for Android Debugging tool, developed by Google for Android developments. It is mainly used by the Android developers and it rarely used by users like us. Through this tool, we can switch to different mode on any Android phone anytime we want. And most importantly, we don’t have to use the hardware buttons for that purpose.

However, to get started with this method, one needs to cumulate some preparations. There’s no need to install the whole Google ADB tool on your computer. Instead, there’s a minimal version that is sufficient enough for this purpose. Here’s what you need to use ADB tool to access recovery mode on your Samsung Galaxy M20:

  • You need a Windows-based computer/laptop.
  • A USB cable of your phone for connection purpose.
  • Download the Samsung USB Drivers from –here and install them on your computer. That ensures your phone gets recognized by the computer.
  • Enable the USB Debugging on your phone. Just follow this tutorial for that purpose. Otherwise, the ADB tool won’t be able to communicate with your phone.

That’s everything you need to get started with this tool. Now, just follow the below instructions to access the recovery mode on your phone.

1. Firstly, download the Minimal ADB tool package from here. Extract the content of the package. Within that folder, tap on Run Me.bat file. This will open the ADB command prompt like this:

Enter recovery mode Galaxy A8s using ADB commands

2. Now, use the USB and connect your phone to the computer.

3. To verify whether your phone is connected or not, type the following command.

adb devices

4. Now, type the following command to enter into the recovery mode.

adb reboot recovery

This command will get your phone into the recovery mode. In a similar way, we can switch to different modes like download, fastboot, bootloader and a few more. That’s how we can boot into the recovery mode on Samsung Galaxy M20 through ADB commands.

Use Quick reboot application (requires root)

Though Android OS has evolved gradually over time, still root has many benefits that attract millions of users. If you’re one of them and have already rooted your phone, then many actions are much easier for you. To switch from usually Android UI to different modes, you can use Quick Reboot application. Available for free on Google Play, this application offers multiple solutions.

Use Quick reboot application to enter recovery mode

Through this app, it becomes seamlessly easier to navigate from Android UI to different modes, just tapping once. Apart from that, recent updates brought some performance and maintenance related features. If you’re looking for more such apps, must check our list of best apps for Samsung Galaxy phones.

Just open this application and tap on the mode that you want to access. Thereafter, your phone will reboot to that mode. Isn’t that simple. That’s what makes rooting so useful.

That ends tutorial here on how to enter/boot recovery mode on Samsung Galaxy M20 through different methods. Based on your situation and convenience, you can use one of them. You must remember others as well, they might be helpful in the future. If there’s anything that we could help you further related to this smartphone or recovery mode, make sure to leave your comments below.

https://techshali.com/wp-content/uploads/2019/02/enter-recovery-mode-galaxy-m20.jpghttps://techshali.com/wp-content/uploads/2019/02/enter-recovery-mode-galaxy-m20-150x150.jpgDeepak GuptaMobileGalaxy M20,Galaxy M20 Recovery Mode,Quick reboot,recovery mode,SamsungFor those who use Android phones, the recovery mode is a quite essential thing that they should know. Whether you want to flash custom firmware or third-party modes, you would need this. Apart from that, this mode helps to perform some cleaning actions like factory reset and wipe cache...