5 Best Alternate Open Source Firmware For Routers [2019]

Technically speaking ‘Routers’ may be defined as the main hardware component of a network that is responsible for forwarding the data packets from one computer to another via a network. In short, a router is a device that performs the functionality of directing traffic over the network. At times, it does happen that you really feel frustrated with the performance of the Wi-Fi router installed at your place, as every time you try to connect with the internet, it will display the warning message, “Network Disconnected”.

This precisely follows the fact that you might not have installed an appropriate router at your place. But now, you need not worry, as there is innumerable alternate open source firmware available that will considerably enhance and completely alter your internet browsing practice at large. And yeah, if you are severely tracking for alternate firmware for the slow routers installed with your PC, so as to alter them into high-speed routers and that too for free, then probably you have visited the right page.

Highlighted below are the five such incredible and amazing alternate open source firmware for your routers with its precise description in detail. This firmware should help operate your router in the best manner and make most out of it. If you’re facing problems on your router, then this firmware may help you fix them and get the productivity out of the router. We hope that our readers would find this list of best open source firmware for routers.

Best Alternate Open Source Firmware For Routers

Gargoyle Firmware

1. Gargoyle Firmware:

Gargoyle is basically an open source firmware available for your routers. This router’s functionality is based on OpenWrt open source firmware routers. Technically speaking, it is purely centered on Athros and Broadcom chip-set wireless routers available. This open-source firmware router is inbuilt with Bandwidth management and Bandwidth Monitoring Firewall functionality.

It is always that one should always opt for an appropriate firmware for the router because in-appropriate firmware will do considerable damage to the new router installed with the modem. So, what you are required to do is to authorize your wireless router registered on the Gargoyle Firmware dropdown download list and select the appropriate firmware for your router.

You can download it from here.

Must see:

Chilifire Firmware

2. Chilifire Firmware:

Chilifire is also one of the most familiar and open source OpenWrt based superb and incredible Hotspot Management Software. Chilifire alternate firmware usually offers you Hotspot user-authorization portal, which goes a long way in securing and efficiently managing your network system. Moreover, if you are severely looking for a purely cloud-based Hotspot users authorization portal solution significantly, then there is no best option than Chilifire open source firmware for your router.

For visualizing the full-fledged list of all the supported routers with this firmware, you can have a brief insight into chilifire web URL. Just create an account there and register your router to get successive updates on the new functionalities that can be added in this firmware.

You can download it from here.

Openwrt Firmware

3. Openwrt Firmware:

One of the best and most frequently used open Source alternate firmware for routers is OpenWrt. It is a purely a GNU Linux based firmware program. Basically, this firmware is designed to work efficiently with an embedded Operating System(OS)S. It offers you enhanced command-line as well as web-interface configuration, which thus enable you to hike the functionality and speed of your router.

Must see:

Besides this, OpenWrt firmware also provides you a comprehensive and detailed hardware list of all the appropriate firmware’s suitable for your routers. Mind it choosing an appropriate firmware will totally block your router.

You can download it from here.

Dd-wrt Firmware

4. Dd-wrt Firmware:

DD-WRT is basically an embedded system firmware and is an outstanding alternate open source firmware for WLAN routers. Since we know that firmware is the heart and soul of the hardware, so DD-WRT offers you a comprehensive list of open source firmware’s typically suitable for all the branded routers.

Not only this, DD-WRT tends to offer you with enhanced functionalities that remarkably enhance your internet browsing speed at large. No, you need not worry about the slower internet connection. Just visit the DD-WRT web URL and get all the required functionalities for your router.

You can download it from here.

Tomato Firmware

5. Tomato Firmware:

More precisely, Tomato firmware is basically a Hyper-WRT based alternate open source wireless router firmware that offers amazing connectivity and incredible stability with loads of magnificent features. Its functionality is based on Broadcom Chipset wireless-router. One of the remarkable feature offered by alternate Open source Tomato firmware is that it enables you to use Virtual Private Network (VPN) technology tunnels with this open source firmware.

The complete list of comprehensive and advanced functionality offered by this alternate firmware includes Telnet, Bridge Mode, SSH (Secure shell) authorization), AP (Access Point) Mode, DHCP (Dynamic Host Configuration Protocol) Server, CLI and many more.

You can download it from here.

So, these are quite a few incredible and amazing alternate open source firmware for routers that not only enhances the overall performance of the routers but also goes ahead in stabilizing its considerably to a greater extent.

One Comment

  1. Thanks for Sharing alternate firmware.
    Is it safe to upgrade my D-Link WiFi router with open source firmware or also a risk.
    I am facing disconnection problem in my WiFi.
    Please help me

Leave a Reply

Your email address will not be published. Required fields are marked *