Certainly, attaining extra information about our devices help a lot of time. The newer version of Galaxy J3 has launched this month. The specification has been revamped and now it is much better as compared to the former device. In this tutorial, we help you to enter Samsung Galaxy J3 (2018) into the recovery mode and learn about its basics. It is important to be able to boot this smartphone into different modes like Recovery, Safe, and Bootloader. It will help you to maintain this device properly and do some advance actions quickly.

While we understand different ways to enter into the recovery mode on Samsung Galaxy J3 (2018), we’ll also discuss some most important aspects of this mode. The recovery mode offers some extensively powerful features. These features are helpful for maintenance purpose. The recovery mode is something that is essential for smartphones. Almost all smartphones are shipped with it.

With the help of the recovery mode, you can manage tasks like a manual update, flash stock firmware, perform resets, create backups, and so on. That makes this mode so important and thus you must make yourself aware of it. Sooner or later, you would require to boot your Samsung Galaxy J3 (2018) in the recovery mode. In this guide, we will explore different methods. These methods are completely ethical and have no impact on the warranty.

Entering into the recovery mode and using will not void the warranty of your phone. Or it doesn’t harm your phone either. But you mustn’t use it without a purpose. This mode is so powerful that it can wipe out the phone instantly. And there is no way to recover the deleted files. Therefore, it is recommended that you use the recovery mode wisely.

The Samsung Galaxy J3 (2018) comes with stock recovery software. That is pretty good and it can be replaced with a custom one. The handset supports the native methods to get into the recovery mode. We have three different methods to access this mode.

Also see:

The very first includes the use of the physical buttons, the most common method. The other two require some preparations and are barely used. But they are helpful in cases where you’re unable to use the traditional method. In conclusion, the other two methods are important and can help a lot.

Enter Recovery mode on Samsung Galaxy J3 (2018)

This method is widely used and common among Samsung’s device having a physical home – button. The instruction below will guide you to enter Samsung Galaxy J3 (2018) into the recovery mode.

  1. Switch OFF your phone through the Power button.
  2. Now, press and hold Volume Up, Home, and Power buttons all together at once.
  3. Release all the buttons once Samsung Logo appears.
  4. If the Android Logo appears, press and hold the Power button and click the Volume Up button.
  5. Now, you should enter into the recovery mode.

In this way, you can boot into the recovery mode on Galaxy J3 (2018) anytime you want. The recovery has some maintenance related features. The recovery mode on Galaxy J3 looks like below:

Enter Recovery mode on Samsung Galaxy J3 (2018)

The stock recovery has enough features for maintenance purpose.

How to use the Recovery Mode

The very first option, reboot system now helps to get out this mode. If you get bored watching this black/blue screen, then use this option to jump out of this mode.

The next option serves its purpose well. It helps you to boot into the bootloader. That helps to connect with Android development tools. It is more likely to be used by Android developers.

Moving on to the next two options, they are like a cream on the cake. This two help to update the smartphone manually. If you ever realized that only you’re not getting official updates, then you can manually flash them.

The wipe data/factory reset and wipe cache partition is used to perform resets. If your device is running low on performance and throwing glitches, then you might just need to perform a reset.

But make sure to backup everything before doing so. The factory reset wipes the device completely.

This information should be enough to get started on the Samsung Galaxy J3 (2018).

Now, here are the two other methods to access this mode.

2. Use ADB commands

This method comes helpful when the user is unable to use the first method. It doesn’t include the use of any physical button. So, in case if any of the physical buttons don’t work, this method should help you.

Basically, ADB stands for Android Debugging — the Android development tool. We will use this tool to access the recovery mode on Samsung Galaxy J3 (2018). And it helps to do more with commands.

There are some prerequisites that you must arrange and setup to use this method.

  • You need a Windows-based computer and a USB cable to connect the device.
  • Install the USB Drivers of your Samsung Galaxy smartphone on your computer. You can download the USB Drivers from →here.
  • Download the Minimal ADB tool from here. Extract the content of the package to obtain the Run Me.bat file.
  1. That’s all you need. You’re ready to use the ADB commands to access the recovery mode:
  2. From the extracted Minimal ADB tool, tap twice on the Run Me.bat file to open the ADB tool interface. It looks like below:Minimal ADB Command Tool Android
  3. Connect your phone to the computer using the USB cable.
  4. Now, on the command prompt, type following:
    • adb reboot recovery
  5. The phone will reboot and take you to the recovery mode in no time.

There are more useful commands that you learn and perform through ADB command prompt.

The next method requires root access. Basically, rooting has many advantages and it is one of them.

3. Use a dedicated app (Quick Reboot)

If you’re an advanced user, then you’ve rooted your phone. It delights the overall experience and pushes the device towards better productivity.

For root users, there is an application that does this job pretty well. The Quick Reboot application instantly boots the device into different modes. It simply serves extended reboot options.

While you reboot, you get a few boot options including Recovery mode, bootloader and a few more.

Quick Boot app for Samsung Galaxy J6

You can get this application from Google Play Store. It is completely free to download and use. With root access, you can do a lot more.

But it hurts the warranty of the device.

So, there are methods that help Samsung Galaxy J3 users to get into the recovery mode. If you have any new method, please share with us. You’re welcome to leave comments below.

That ends our tutorial here. There are different ways to get into this mode. We would bring more useful stuff for this smartphone #GalaxyJ3. Share this tutorial with your friends, and keep in touch.

https://techshali.com/wp-content/uploads/2018/06/recovery-mode-galaxy-j3-2018.jpghttps://techshali.com/wp-content/uploads/2018/06/recovery-mode-galaxy-j3-2018-150x150.jpgDeepak GuptaMobileGalaxy J3,recovery mode,Samsung,Samsung Galaxy J3Certainly, attaining extra information about our devices help a lot of time. The newer version of Galaxy J3 has launched this month. The specification has been revamped and now it is much better as compared to the former device. In this tutorial, we help you to enter Samsung Galaxy...